murano glass jewelry wholesale
1 thought on “murano glass jewelry wholesale Don't underestimate the emerald bead chain, this green necklace actually shoots hundreds of millions of days”
Leave a Comment
You must be logged in to post a comment.
murano glass jewelry wholesale
You must be logged in to post a comment.
egyptian jewelry box wholesale Remember the popular emerald bead chain? The former owner of this necklace is a legendary label and collector Barbarahton. It consists of 27 natural emerald beads. The diameter of the emerald beads reached 15.40-19.20 mm, which became the most expensive jewelry in the auction room at that time.
In fact, this emerald bead chain was not auctioned by 214 million yuan, this emerald bead chain has been auctioned three times. In the auction in 1988, it was sold for $ 2 million. In 1994, the auction price soared to $ 4.2 million. Until 2014, the third appeared, the transaction price reached HK $ 214 million (US $ 27.44 million).
At the jewelry emerald auction over the years, the emerald bead chain is the highlight of the finale, and the transaction price is tens of millions of yuan, but many merchants do not produce emerald beads because it is too wasteful. All consisting of ballpoints, the craftsmanship is not complicated, but the requirements for the dose are very high.
It to make a bunch of emerald bead chains, not only the same water, but generally the same rough stone. Therefore, the good emerald bead chain must be good enough, and in order to achieve uniform and unified overall color, it must also come from the same rough stone.
The emerald necklace in Barbarahton has been appreciated for nearly 14 times in less than 30 years. You also think that the rich came to shoot the top emerald crazy, just to enjoy the thrill of a lot of money? Actually Mainly because of the following points;
1
not every rough can be made into a bead chain. The following conditions need to be met: no patterns and no cracks, uniform colors, sufficient raw materials, and finished cutting. I can't do anything else, so it is extremely expected. At the moment when high -end jadeite raw materials are scarce, high prices are inevitable.
2 Cut
In the unavailable part, draw the diameter of the beads on the raw materials, and cut it. Each circle is a bead.
3 Facking angle
The jade pearls after cutting are generally squares or cylinders. You must remove the angles. Essence
4 Positioning
The angle machine can remove the corners of the emerald material, but the beads cannot be grinded very round, and the ball is also grinded to round it.
5 perforation
The ordinary material to punch, you can use machines to fight, and the good beads are manually selected one by one, then punching.
6 polishing
This to the emerald beads, and the same manual throwing and machine throwing. The manual is more fine and the machine is more efficient.
So don't underestimate these emerald beads, every one is very valuable!